Dust-proof and water-proof SAW touchscreenW series
The water resistant feature of the products is compliant with NEMA3 and IEC IP65 standards, which can protect the reflective grating and the transducers from the water and the dust.
Test way: 1. Take the panel Level laying aside, then pour water on it. And keep this condition 24 hours. 2. Spill the water and clean the panel. 3. The touchscreen can work fine. ² Excellent maintenance-free and durability ² Applicable to the outdoor environment environments where in unsupervised or industrial environments.
Touch screen saw for 15.1" Thickness=4MM
| Outside Dimension |
344×268×7.5mm |
| viewing area |
344×268×7.5mm |
| Active area |
304×228mm |
| Resolution |
4096×4096 |
| Thickness |
4mm |
| Transparency |
90%92% |
| TouchSensibility |
Touchforcelowerthan80g(adjustallowed) |
| Touch response |
Less than 10 MSEL |
| Expected life |
More than 50 million touches in one location |
| Anti-glare surface 6 |
1 minimum |
| Gloss(Using a 60-degree )Flat |
80±15 gloss units |
| Surface durability |
Mohs's hardness rating of 7 |
| Operating |
-20+50 |
| Storage |
-4070 |
| Controller operating temperature |
065 |
| Controller storage temperature |
-2570 |
| Humidity |
10%90%40 |
| OperationAltitude |
3000 meter |
